BenchVent BV300S-D Ducted Extraction Unit - A3

BenchVent BV300S-D Ducted Extraction Unit - A3

E8R07207

Product code: E8R07207

Direct Delivery – up to 10 days.

The BenchVent BV300S-D is an A3 Extraction Unit for aerosols, airbrushes and more. It's also well suited to extracting solder fumes, general solvent vapours and gases to atmosphere. It's design also means it can be used for dust extraction (from grinding etc.) as well as general particulates and powders. Because the BV300S-D is an extraction unit it comes complete with the Flexi-Duct to atmosphere extraction fittings. The Flexi-duct can be fixed to a standard domestic vent or simply placed through a partially open window to facilitate portability or convenience. This is an extraction unit i.e. all odours and gases and extracted to atmosphere.

What's included with the BV300S-D?

  • Filter unit with fan and 2mtrs flexi-duct
  • Spray Shield
  • 1 x Particulate filter
  • Power Lead
  • Data/Warranty Booklet

Key Features:

  • Replaceable plastic spray/fume shield
  • Carry handle
  • Can be assembled in seconds

This unit can be used in two positions: Horizontal position (For Spray Mount, aerosol lacquers and fixatives etc. applied to artwork placed onto the filter. Accommodates artwork up to A3 size.) and Vertical position (For model sprays and airbrush use, light grinding particles (not sparking), solder fume extraction, general solvent and gas extraction)

The design of this unit makes it ideal for applications that include filtration and removal of:

  • Aerosol paints
  • Lacquers
  • Adhesives (glue booth for Spray Mount)
  • Airbrush over-spray
  • Solder fume
  • General solvent vapours and gases
  • Grinding dusts
  • General particulates
  • Powders
  • and more...

Dimensions and Specification:
  • External dimensions (W x H x D): 505 x 390 x 430
  • Steel construction finished in dove grey
  • Plastic replaceable spray/fume shield
  • Particulate filter
  • Centrifugal blower
  • External rotor
  • Brushless motor type
  • UL, VDE and CSA approved
  • Sealed electrical wiring and switch
  • Downstream of filter
  • Flexi-duct 2 metres x 100 mm dia
  • Carry handle

All BenchVent filtration and extraction units come with a lifetime guarantee, are quiet in operation and are extremely quick to get up and running. All that's required is to place the extraction unit on a desk or trolley and simply plug it in and switch on. Because the BV300S-D is an extraction unit it comes complete with our Flexi-Duct to atmosphere extraction fittings. The Flexi-duct can be fixed to a standard domestic vent or simply placed through a partially open window to facilitate portability or convenience.

Further Information

Brand
BenchVent
Ideal for
Solder fume
Portable
Yes with carry handle
Product Type
Extraction
Size
A3

Documents

Direct Delivery – up to 10 days.

The BenchVent BV300S-D is an A3 Extraction Unit for aerosols, airbrushes and more. It's also well suited to extracting solder fumes, general solvent vapours and gases to atmosphere. It's design also means it can be used for dust extraction (from grinding etc.) as well as general particulates and powders. Because the BV300S-D is an extraction unit it comes complete with the Flexi-Duct to atmosphere extraction fittings. The Flexi-duct can be fixed to a standard domestic vent or simply placed through a partially open window to facilitate portability or convenience. This is an extraction unit i.e. all odours and gases and extracted to atmosphere.

What's included with the BV300S-D?

  • Filter unit with fan and 2mtrs flexi-duct
  • Spray Shield
  • 1 x Particulate filter
  • Power Lead
  • Data/Warranty Booklet

Key Features:

  • Replaceable plastic spray/fume shield
  • Carry handle
  • Can be assembled in seconds

This unit can be used in two positions: Horizontal position (For Spray Mount, aerosol lacquers and fixatives etc. applied to artwork placed onto the filter. Accommodates artwork up to A3 size.) and Vertical position (For model sprays and airbrush use, light grinding particles (not sparking), solder fume extraction, general solvent and gas extraction)

The design of this unit makes it ideal for applications that include filtration and removal of:

  • Aerosol paints
  • Lacquers
  • Adhesives (glue booth for Spray Mount)
  • Airbrush over-spray
  • Solder fume
  • General solvent vapours and gases
  • Grinding dusts
  • General particulates
  • Powders
  • and more...

Dimensions and Specification:
  • External dimensions (W x H x D): 505 x 390 x 430
  • Steel construction finished in dove grey
  • Plastic replaceable spray/fume shield
  • Particulate filter
  • Centrifugal blower
  • External rotor
  • Brushless motor type
  • UL, VDE and CSA approved
  • Sealed electrical wiring and switch
  • Downstream of filter
  • Flexi-duct 2 metres x 100 mm dia
  • Carry handle

All BenchVent filtration and extraction units come with a lifetime guarantee, are quiet in operation and are extremely quick to get up and running. All that's required is to place the extraction unit on a desk or trolley and simply plug it in and switch on. Because the BV300S-D is an extraction unit it comes complete with our Flexi-Duct to atmosphere extraction fittings. The Flexi-duct can be fixed to a standard domestic vent or simply placed through a partially open window to facilitate portability or convenience.

Further Information

Brand
BenchVent
Ideal for
Solder fume
Portable
Yes with carry handle
Product Type
Extraction
Size
A3

Documents

You May Also Like